REFERENCES

[1] Bessey, G. E. “Part II: the Visible Changes in Concrete or Mortar Exposed to High Temperatures.” Investigations on Building Fires, National Building Studies Technical Paper No. 4, London: Department of Scientific and Industrial Research, 6-18, (1950).

[2] Parker, T. W., and Nurse, R. W. “Part I: The Estimation of the Maximum Temperature Attained in Building Fires from Examination of the Debris.” Investigations on Building Fires, National Building Studies Technical Paper No. 4, London: Department of Scientific and Industrial Research, 1-5, (1950).

[3] Crosby, E. U., Fiske, H. A., and Forster, H. W. Hand-Book of Fire Protection, Sixth Edition ed., New York, NY: D. Van Nostrand Company, (1921).

[4] . Fire Protection Handbook, 6th edition, ed., : National Fire Protection Association, (1921).

[5] Moulton, R. S., ed., NFPA Handbook of Fire Protection. 11 ed., Boston, MA: National Fire Protection Association, (1954).

[6] . “Fire Investigation and Reporting / Evaluating Structural Fire Damage.” NFPA Handbook: NFPA, (1962).

[7] . “Fire Investigation and Reporting — Analysis of Fire Losses.” Fire Protection Handbook, G. H. Tyron, ed., Boston, Mass.: National Fire Protection Association, (1969).

[8] Kirk, P. L. Fire Investigation Including Fire-Related Phenomena: Arson, Explosion, Asphyxiation, ed., New York, NY: John Wiley and Sons, (1969).

[9] Battle, B. P., and Weston, P. B. “Chapter VI: Arson.” Arson Detection and Investigation, New York, NY: Arco Publishing Co., 72-193, (1978).

[10] “The Fireman's Responsibility in Arson Detection.” National Fire Protection Association, Boston, MA, (1971).

[11] Bates, G. F., et. al. “A Systematic Approach for Determining the Point of Origin.” National Fire Academy, Emmitsburg, MD, (1981).

[12] Phillipps, C. C. “Case History: Fire Extension Through Flooring.” Investigating the Fireground, G. Post and J. Yvorra, eds., Bowie, MD: Robert J. Brady Co., 158-177, (1982).

[13] Phillipps, C. C. “Heat, Flame, and Smoke Patterns.” Investigating the Fireground, G. Post and J. Yvorra, eds., Bowie, MD: Robert J. Brady Co., 150-157, (1982).

[14] Roblee, C. L. “Chapter 2: the Chemistry of Fire and Fire Behavior.” The Investigation of Fires, Englewood Cliffs, NJ: Prentice-Hall, 4-13, (1981).

[15] Williamson, R. B., and Dembsey, N. A. “Advances in Assessment Methods for Fire Safety.” Fire Safety Journal, 20: 15-38,(1993).

[16] Emmons, H. W. “Why Fire Model? The MGM Fire and Toxicity Testing.” Fire Safety Journal, 13: 77-85,(1988).

[17] Mowrer, F. W., and Williamson, R. B. “Room Fire Modeling within a Computer-Aided Design Framework.” Fire Safety Science, Proceedings of the Second International Symposium, 453-461, (1989).

[18] . “Section 4-5.5.” NFPA 921: Guide for Fire and Explosion Investigation, Quincy, MA: National Fire Protection Association, (1998).

[19] Babrauskas, V., and Williamson, R. B. “Post-Flashover Compartment Fires--Basis of a Theoretical Model.” Fire and Materials, 2(2): 39-53,(1978).

[20] Hawley, G. G., ed., The Condensed Chemical Dictionary. 8th ed., New York, NY: Van Nostrand Reinhold Company, (1971).

[21] Schaffer, E. L. “Review of Information Related to the Charring Rate of Wood.” FPL-0145, U.S.D.A. Forest Service Forest Products Laboratory, Madison, WI, (1966).

[22] Roberts, A. F. “Combustion of Solid Organic Materials: Theoretical Analysis of Burning of Wood.” Thirteenth Symposium (International) on Combustion, p. 893-903, (1970).

[23] Zicherman, J. B. “A Study of Wood Morphology and Microstructure in Relation to Its Behavior in Fire Exposure,” Ph.D. Dissertation, University of California, Berkeley, Berkeley, CA, (1978).

[24] Browne, F. L., and Tang, W. K. “Thermogravimetric and Differential Thermal Analysis of Wood and of Wood Treated with Inorganic Salts during Pyrolysis.” Forest Products Laboratory, U.S. Department of Agriculture, Madison, WI, (1962).

[25] Tang, W. K., and Neill, W. K. “Effect of Flame Retardants on Pyrolysis and Combustion of a-Cellulose.” Journal of Polymer Science: Part C, 6: 65-81,(1964).

[26] Kudo, J., and Yoshida, E. “On the Decomposition Process of Wood Constituents in the Course of Carbonization. I. The Decomposition of Carbohydrate and Lignin in MIZUNARA (Quercus crispla BLUME).” Journal of Japanese Wood Research, 3(4): 125-127,(1957).

[27] Browne, F. L. “Theories of the Combustion of Wood and Its Control.” Report 2136, United States Forest Products Laboratory, (1958).

[28] Eickner, H. W. “Basic Research on the Pyrolysis and Combustion of Wood.” Forest Products Laboratory, Madison, WI, (1962).

[29] Jönsson, R., and Pettersson, O. “Timber Structures and Fire: Review of Existing State of Knowledge and Research Requirements.” D-3:1985, Swedish Council for Building Research, Stockholm, Sweden, (1985).

[30] Janssens, M. L., and White, R. H. “Short Communication: Temperature Profiles in Wood Members Exposed to Fire.” Fire and Materials, 18: 263-265,(1994).

[31] Schaffer, E. L. “Charring Rate of Selected Woods — Transverse to Grain.” FPL 69, U.S. Forest Service, Forest Products Laboratory, Madison, WI, (1967).

[32] Zicherman, J., and Williamson, R. B. “A Macroscopic and Microscopic Investigation of Burned Wood.” Seventeenth (International) Symposium on Combusion, University of Leeds, England, (1978).

[33] Domansky, R., and Rendos, F. “On the Pyrolysis of Wood and its Components.” Holz als Ruh und Werkstoff (in German, trans. United States Forest Products Lab.), 20(12): 473-476,(1962).

[34] Lie, T. T. “Contribution of Insulation in Cavity Walls to Propagation of Fire.” Fire Study No. 29, National Research Council of Canada, Division of Building Research, Ottawa, Canada, (1972).

[35] White, R. L., and Schaffer, E. L. “Application of CMA Program to Wood Charring.” Fire Technology, November,(1981).

[36] Tang, W. K. “Effect of Inorganic Salts on Pyrolysis of Wood, Alpha-Cellulose, and Lignin Determined by Dynamic Thermogravimetry.” Research Paper FPL 71, United States Forest Products Laboratory, Madison, WI, (1967).

[37] McNaughton, G. C. “Ignition and Charring Temperatures of Wood.” Wood Products, 50: 21-22,(1945).

[38] DeHaan, J. D. “Chapter 5: Combustion Properties of Solid Fuels.” Kirk's Fire Investigation, Englewood Cliffs, NJ: Prentice-Hall, Brady Division, 49-66, (1997).

[39] . “Section 4-3: Fire Patterns.” NFPA 921: Guide for Fire and Explosion Investigation, Quincy, MA: National Fire Protection Association, 921.25, (1995).

[40] Butler, M. J., editor, and Slater, J. A., editor. “Fire Safety Research.” Proceedings of a Symposium Held at the National Bureau of Standards, Washington, DC, 240, (1973).

[41] O’Connor, J. J. Practical Fire and Arson Investigation, ed., New York, NY: Elsevier, (1987).

[42] . NFPA 921: Guide for Fire and Explosion Investigation, ed., Quincy, MA: National Fire Protection Association, (1995).

[43] Phillips, S. A. “How Wood Chars and What it Means to the Fire Investigator.” The Fire and Arson Investigator, 38(4): 28-30,(1988).

[44] DeHaan, J. D. Kirk’s Fire Investigation, 3 ed., Englewood Cliffs, NJ: Prentice-Hall, Brady Division, (1997).

[45] Cooke, R. A., and Ide, R. H. Principles of Fire Investigation, ed., Leicester, England: The Institution of Fire Engineers, (1985).

[46] Bates, E. B. Elements of Fire and Arson Investigation, ed., Santa Cruz, CA: Davis Publishing Company, (1980).

[47] . “ASTM E119-73: Standard Methods of Fire Tests of Building Construction and Materials.” Annual Book of ASTM Standards: ASTM Committee E-5 on Fire Tests of Materials and Construction, (1971).

[48] Cardoulis, J. N. “Chapter 9: Burn Patterns and Fire Behaviour.” The Art and Science of Fire Investigation, St. John’s, Newfoundland, Canada: Breakwater Publishing, 60-65, (1990).

[49] Malhotra, H. L. “Chapter 6: Properties of Materials.” Design of Fire-Resisting Structures, New York, NY: Chapman and Hall, 48-85, (1982).

[50] Hadvig, S., and Paulsen, O. R. “One-Dimensional Charring Rates In Wood” Journal of Fire and Flammability, Volume 7: 433-449,(1976).

[51] Nussbaum, R. M. “The Effect of Low Concentration Fire Retardant Impregnations on Wood Charring Rate and Char Yield.” Journal of Fire Sciences, 6,(1988).

[52] Lie, T. T. “Fire and Buildings.” , Applied Science Publishers, Ltd., London, 249-267, .

[53] Malhotra, H. L., and Rogowski, B. F. W. “Fire-Resistance of Laminated Timber Columns.” Symposium No. 3: Fire and Structural Use of Timber in Buildings,, Fire Research Station, Borehamwood, Herts, (1967).

[54] Hall, J. R., Bukowski, R., and Gomberg, A. “Analysis of electrical fire investigations in ten cities.” U.S. Dept. of Commerce, National Bureau of Standards, National Technical Information Service, distributor, Washington, DC, (1983).

[55] Odeen, K. “Fire Resistance of Glued, Laminate d Timber Structures.” Symposium No. 3: Fire and Structural Use of Timber in Buildings,, Fire Research Station, Borehamwood, Herts, (1967).

[56] Tenning, K. “Glued Laminated Timber Beams: Fire Tests and Experience in Practice.” Symposium No. 3: Fire and Structural Use of Timber in Buildings,, Fire Research Station, Borehamwood, Herts, (1967).

[57] Mikkola, E. “On the thermal Ignition of combustable materials.” Fire and Materials, 14,(1989).

[58] Purkiss, J. A. Fire Safety Engineering Design of Structures, ed., Oxford, England: Butterworth-Heineman, (1996).

[59] DeHaan, J. D. “Chapter 7: Structure Fires and Their Investigation.” Kirk’s Fire Investigation, Englewood Cliffs, NJ: Prentice-Hall, Brady Division, 93-153, (1997).

[60] Beall, F. C. “Thermogravimetric Analysis of Wood Lignin and Hemicelluloses.” Wood and Fiber, 1(3): 215-226,(1969).

[61] N.C. Brown Center for Ultrastructural Studies, SUNY College of Environmental Science and Forestry, .

[62] NFPA 921. “Guide for Fire and Explosion Investigations.” (1992).

[63] NFPA 91. “Blower and Exhaust Systems.” (1972).

[64] Butler, C. P. “Notes on Charring Rates in Wood.” Fire Research Note No. 896, (1971).

[65] Drysdale, D. D. “Fundamentals of the Fire Behaviour of Cellular Polymers.” Fire and Cellular Polymers, J. M. Buist, S. J. Grayson, and W. D. Woolley, eds., London and New York: Elsevier Applied Science, 61-75, (1980).

[66] Harmathy, T. Z. Fire Safety Design and Concrete, ed., New York, NY: John Wiley and Sons, (1993).

[67] Mehta, P. K., and Monteiro, P. J. M. Concrete: Structure, Properties, and Materials, 2 ed., Englewood Cliffs, NJ: Prentice Hall, (1993).

[68] Mitchell, L. J. “Thermal Properties: ASTM Special Publication.” Publication 169, American Society for Testing and Materials, (1956).

[69] Neville, A. M. “Durability of Concrete (Chapter 7).” Properties of Concrete, New York City, NY: John Wiley & Sons, Inc., 370-384, (1963).

[70] Mehta, P. K. Concrete: Structure, Properties, and Materials, ed., Englewood Cliffs, NJ: Prentice-Hall, Inc., (1986).

[71] Becker, R., and Katz, A. “Effect of Moisture Movement on Tested Thermal Conductivity of Moist Materials.” Journal of Materials in Civil Engineering, 2: 72-83,(1990).

[72] Selih, J., Sousa, A. C. M., and Bremner, T. W. “Moisture and Heat Flow in Concrete Walls Exposed to Fire.” Journal of Engineering Mechanics, 120(10): 2028-2043,(1994).

[73] Harada, T. “Thermal Expansion of Concrete at High Temperatures.” Architectural Institute of Japan, 46,(1953).

[74] Zoldners, N. G. “Thermal Properties Of Concrete Under Sustained Elevated Temperatures.” Temperature And Concrete, Detroit: American Concrete Institute, 1-31, (1968).

[75] Campbell-Allen, D., and Thorne, C. P. “The thermal conductivity of concrete.” Magazine of Concrete Research, 39-48, (1963).

[76] Riley, M. A. “Possible new method for the assessment of fire-damaged concrete.” Magazine of Contrete Research, 87-92, (1991).

[77] Jumppanen, U. M. “Nordic Concrete Research.” , 8: 116,(1989).

[78] Copier, W. J. “The Spalling of Normal Weight and Lightweight Concrete on Exposure to Fire.” Delft Heron, 24(2),(1979).

[79] Beland, B. “Spalling of Concrete.” The Fire and Arson Investigator, 44(3): 26-31,(1993).

[80] Meyer-Ottens, C. “Abplatzversuche an Pruefkoerpern aus Beton, Stahlbeton, und Spannbeton bei verschiedenen Temperaturebeanspruchungen.” Schriftenreihe des Deutschen Ausschusses fuer Stahlbeton, Berlin, Germany, 241,(1974).

[81] Lentini, J. L. “Documented Case of Accelerant Induced Concrete Spalling.” The Fire and Arson Investigator, 33(2): 30-31,(1982).

[82] Dias, W. P. S., Khoury, G. A., and Sullivan, P. J. “Mechanical Properties of Hardened Cement Paste Exposed to Temperatures up to 700 C.” ACI Materials Journal, 87(160): Chapter 6,(1990).

[83] Harmathy, T. Z., ed., Evaluation and Repair of Fire Damage to Concrete SP 92-4. Detroit, MI: American Concrete Institute, (1986).

[84] Lin, W.-M., Lin, T. D., and Powers-Couche, L. J. “Microstructures of Fire-Damaged Concrete.” ACI Materials Journal, 93(May-June): 199-205,(1996).

[85] Fruchtbaum, J. “Fire Damage to General Mills Building and Its Repair.” Proceedings of the American Concrete Institute, 37(January): 201-248,(1941).

[86] Midkiff Jr., C. R. “Spalling of Concrete as an Indicator of Arson.” The Fire and Arson Investigator, 41(2): 42-45,(1990).

[87] Cruz, C. R., and Gillen, M. “Thermal Expansion of Portland Cement Paste, Mortar, and Concrete at High Temperatures.” Fire and Materials, 4(2),(1980).

[88] Krampf, L., and Haksever, A. “Possibilities of Assessing the Temperatures Reached by Concrete Building Elements During a Fire.” SP 92-7, American Concrete Institute, (1992).

[89] Canfield, D. V. “Causes of Spalling Concrete at Elevated Temperatures.” The Fire and Arson Investigator, 34(4): 22-23,(1984).

[90] Smith, P. “Investigation and Repair of Damage to Concrete Caused by Formwork and Falsework Fire.” Journal of the American Concrete Institute, 60(11): 1535-1565,(1963).

[91] Hsiung, K.-h., and Chang, W. P. “Evaluation of Residual Fire Endurance of Concrete Slabs After Fire Exposure.” Fire and Materials, 18: 201-204,(1994).

[92] . Fire Safety of Concrete Structures, Publication SP-80, ed., Detroit, MI: American Concrete Institute, (1983).

[93] Dougill, J. W. “The effects of thermal incompatibility and shrinkage on the strength of concrete.” Magazine of Concrete Research, 119-126, (1961).

[94] Green, J. K. “Some Aids to the Assessment of Fire Damage.” Concrete, 14-17, (1976).

[95] Malhotra, H. L. “The Effect of Temperature on the Compressive Strength of Concrete.” Magazine Of Concrete Research, 85-94, (1956).

[96] Smith, F. P. “Concrete Spalling: Controlled Fire Tests and Review.” Journal of the Forensic Science Society, 31: 67-75,(1991).

[97] Bessey, G. E. The estimation of free calcium hydroxide in set cements, ed., London: Harrison and Sons, Ltd., in H. M. Stationery Office, (1930).

[98] Powers-Couche, L. “Fire-Damaged Concrete — Up Close.” Concrete Repair Digest, 241-242, (1992-1993).

[99] Smith, F. P., and Mitchell, J. R. “Concrete Spalling Under Controlled Conditions.” The Fire and Arson Investigator, 32(2): 38-39,(1981).

[100] Tovey, A. K. “Assessment and Repair of Fire Damaged Concrete Structures: An Update.” Evaluation and Repair of Fire Damage to Concrete, T. Z. Harmathy, ed., Detroit, MI: American Concrete Institute, (1986).

[101] Short, N. R., Guise, Sarah E., and Purkiss, John A. “Assessment of Fire Damaged Concrete Using Colour Analysis.” Interflam '96, England, 927-931, (1996).

[102] Placido, F. “Thermoluminescence test for fire-damaged concrete.” Magazine Of Concrete Research, 112-116, (1980).

[103] Schneider, U. “Repairability of Fire Damaged Structures.” Fire Safety Journal, 16(Special Issue): 251-337,(1990).

[104] Midkiff, C. “Spalling: On the Trail of Arson.” Fire and Arson Investigator: 45,(1994).

[105] Cardoulis, J. N. The Art and Science of Fire Investigation, ed., St. John’s, Newfoundland, Canada: Breakwater Publishing, (1990).

[106] Stickevers, J. “Flammable Liquid Interpretations of Burn Patterns.” The Fire and Arson Investigator, 33(2): 24-27,(1982).

[107] Erlin, B., Hime, W. G., and Kuenning, W. H. “Evaluating Fire Damage to Concrete Structures.” Concrete Construction, (1972).

[108] ASTM. “ASTM C 856-95: Standard Practice for Petrographic Examination of Hardened Concrete.” Annual Book of ASTM Standards, West Conshohocken, PA: , 405-419, (1996).

[109] CRSI Committee on Fire Ratings. “Chapter 6 — Temperatures Within Reinforced Concrete Members During Fire Tests.” Reinforced Concrete Fire Resistance, Chicago: , (1980).

[110] Chew, M. Y. L. “Assessing Heated Concrete and Masonry with Thermoluminescence.” ACI Materials Journal, 85(6): 537-543,(1988).

[111] Chew, M. Y. L. “Effect of Heat Exposure Duration on the Thermoluminescence of Concrete.” ACI Materials Journal, 90(4): 319-322,(1993).

[112] Mehaffey, J. R., and Sultan, M. A. “Heat Transfer Through Wood-Stud Wall Assemblies Exposed to Fire.” Fire and Materials: First International Conference and Exhibition, Washington National Airport, U.S.A., 247-251, (1992).

[113] Elliott, C. “The Effect of Heat on Gypsum.” The Chemical Trade Journal and Chemical Engineer: 725-726,(1923).

[114] Convener, J. A. F. “Gypsum and Anhydrite and Their Products.” Reports on the Progress of Applied Chemistry 1972, London, England: Academic Press, (1972).

[115] Bensted, J. “Hydration of Portland Cement.” Advances in Cement Technology, S. N. Ghosh, ed., New York, NY: Pergamon Press, 307-335, (1981).

[116] Lea, F. M., and Desch, C. H. The Chemistry of Cement and Concrete, ed., New York, NY: Longmans, Green & Co., (1935).

[117] Levin, E. M., Robbins, C. R., and McMurdie, H. F. Phase Diagrams for Ceramists, ed., Columbus, OH: The American Ceramic Society, (1964).

[118] Ashe, G. M., et. al. “The Use of Gypsum Wallboard as an Investigative Tool.” National Fire Academy, Emmitsburg, MD, (1983).

[119] Posey, J. E., and Posey, E. P., eds., Using Calcination of Gypsum Wallboard to Reveal Wall Patterns. IAAI, (1992).

[120] Shields, T. J. Buildings and Fire, ed., Essex, England: Longman Scientific and Technical, (1987).

[121] “Uniform Building Code.” International Conference of Building Officials, Whittier, CA, (1996).

[122] Incropera, F. P., and DeWitt, D. P. Fundamentals of Heat and Mass Transfer, 3 ed., New York, NY: John Wiley and Sons, (1990).

[123] Harmathy, T. Z. “Chapter 8: Wood, Brick, Gypsum, Plastics.” Fire Safety Design and Concrete, New York, NY: John Wiley and Sons, 144-158, (1993).

[124] Mehaffey, J. R., and Hisa, T. “Predicting Heat Transfer through Wood Stud Walls Exposed to Fire.” International Conference on Fire Research and Engineering, Orlando, Florida, (1995).

[125] McGraw Jr., J. R., and Mowrer, F. “Flammability and Dehydration of Painted Gypsum Wallboard Subjected to Heat Fluxes.” Working Paper,(1998).

[126] Malhotra, V. M., ed., Advances in Concrete Technology. Second Edition ed., Ottawa, Canada: Natural Resources Canada, (1994).